IDS Forum

Re: Fwd: IDS On Win Vista Ultimate

Posted By: Jean Sagi
Date: Thursday, 15 May 2008, at 11:58 a.m.

In Response To: Re: IDS On Win Vista Ultimate (Jean Sagi)

BTW

Where can I get a "developer edition" of 11.10.TC2W2? I don't like
time-limited versions ;)

J.

2008/5/4 Guy Bowerman <guyb@us.ibm.com>:

>
> Hi Jean,
>
> My mail gateway from IIUG doesn't appear to be working at the moment so I
> don't know if anyone replied to this.
>
> One unknown here is that you are using a Vista Home edition. We don't
> support and hence don't test Vista Home, so it is possible you may be seeing
> a problem that is peculiar to Home edition. The error itself sounds like a
> TC1 problem with domain installs (see
> http://www.ibm.com/developerworks/blogs/page/gbowerman?entry=ids_problems_with_windows_domains)
> but I'll assume you've not set up domains in a Vista Home environment, so
> this might be something else.
>
> Is there any way you can test 11.10.TC2W2 or later, and not use Vista Home?
> Also, just to make sure we're not seeing any errors left over from a
> previous install, uninstall IDS, or if it's not installed just make sure
> you've deleted the informix user if it exists and Informix-Admin group, as
> well as HKEY_LOCAL_MACHINE\Software\Informix from the Registry.
>
> Regards
> Guy
>
> ---------- Forwarded message ----------
> From: Jean Sagi <jeansagi.ifx@gmail.com>
> Date: Thu, May 1, 2008 at 9:01 AM
> Subject: Re: IDS On Win Vista Ultimate [11944]
> To: ids@iiug.org
>
>
> Hi Every one...
>
> Certainly installing IDS 11.10 TC1DE on winblow$ vi$ta is certainly a royal
> pain !! (Don't know who to blame...)
>
> *First: *
> norolesep_createinfxuser 3 - Could not add the specified user to the group.
> norolesep_adj_usr_right - -1073741823
>
> Supposedly TC2 work this out but other problems arise... Need to manually
> create user Informix...
>
> *
> Second:*
> The default instance offered by the installer don't get installed (because
> of first?)... but well... going back from TC2-Trial to TC1-DE (previously
> having informix user created) it seems to work...
> But no, the instace doesn't get created and the gui instance program does
> not work... manual creation of the instance doesn't work either... further
> investigation reveal -25580 problems creating *sysmaster !!*
> Wich brught me here !
> *
>
> Third:
> *Trying your suggestion enabling net bios over tcp/ip (IPv4) doesn't work.
> And really this comment on IPv6, I don't understand what I have to do...
>
> *Finally:*
> The comment of Mr. Panosso seems to be the only way to go... after
> disabling
> the firewall (ESET firewall in my case) make things work ! and very fast
> !!.
>
> *So:*
> Does anyone know of a procedure to successfully install IDS 11.xx-yy on
> Windows Vista? (BTW I'm on Home Premium), obviously with the OS firewall
> up?
> (NOTE: Google doesn't show much info... nor IDS developer sites, nor
> blogs).
>
> J.
>
> PD1: I thought the windows installer had improved at least some bits since
> I
> tested IDS 11.10 beta on XP which BTW sucked at that time)
> PD2: How much I miss linux/HP-UX installs... never this kind of stuff !
>
> 2008/1/20 Guy . <gbowerman@yahoo.com>:
>
> > One other possible cause of the problem on Vista, from the machine notes:
> >
> > IPv6 Support
> >
> > IBM Informix Server supports Internet Protocol Version 6 (128 Bit
> Internet
> >
> > Addresses) as well as IPv4 (32 Bit Addresses).
> >
> > In order for the machine name specified in the SQLHOSTS registry to
> > resolve
> >
> > to the correct IP address, the name services files on the Operating
> System
> >
> > should be correctly configured.
> >
> > For compatibility with older IBM Informix client and server products,
> >
> > assign the same hostname with both an IPv4 address and an IPv6 address.
> >
> > If the listener needs to be bound to an IPv4 address and the name
> services
> >
> > resolve the name in the order of the IPv6 address followed by IPv4
> > address,
> >
> > then an explicit IPv4 address needs to be put in nodename field of server
> >
> > registry.
> >
> > ----- Original Message ----
> > From: LUIS PANOZZO <lupasa@sisa.com.bo>
> > To: ids@iiug.org
> > Sent: Saturday, January 19, 2008 3:31:13 PM
> > Subject: IDS On Win Vista Ultimate [11012]
> >
> > Hello:
> >
> > I just installed IDS 11.10.TC2 on Windows Vista Ultimate.
> >
> > The SO has all updates.
> >
> > When I try to connect to the engine I get error -25580.
> >
> > I figure that when Windows Firewall with Advanced Security is working I
> > can't
> > connect to the engine.
> >
> > But when I wrote a new rule opening port 9088 (the port engine is
> > using)
> > nothing hapens.
> >
> > Do anybody knows what to do??
> >
> > Thank You.
>

Messages In This Thread

• IDS On Win Vista Ultimate
  LUIS PANOZZO -- Saturday, 19 January 2008, at 6:31 p.m.
  • Re: IDS On Win Vista Ultimate
    Guy . -- Sunday, 20 January 2008, at 1:58 a.m.
    • Re: IDS On Win Vista Ultimate
      LUIS PANOZZO -- Sunday, 20 January 2008, at 2:52 p.m.
  • Re: IDS On Win Vista Ultimate
    Guy . -- Sunday, 20 January 2008, at 2:00 a.m.
    • Re: IDS On Win Vista Ultimate
      Jean Sagi -- Thursday, 1 May 2008, at 12:01 p.m.
      • Re: IDS On Win Vista Ultimate
        Jonathan Leffler -- Sunday, 4 May 2008, at 3:46 p.m.
        • Re: IDS On Win Vista Ultimate
          Jean Sagi -- Monday, 26 May 2008, at 11:49 a.m.
          • Re: IDS On Win Vista Ultimate
            lupasa@sisa.com.bo -- Monday, 26 May 2008, at 3:09 p.m.
            • Re: IDS On Win Vista Ultimate
              Jean Sagi -- Tuesday, 27 May 2008, at 11:43 a.m.
      • Re: Fwd: IDS On Win Vista Ultimate
        Jean Sagi -- Thursday, 15 May 2008, at 11:58 a.m.
        • Re: Fwd: IDS On Win Vista Ultimate
          Guy . -- Friday, 16 May 2008, at 1:55 a.m.

IDS Forum is maintained by Administrator with WebBBS 5.12.