 |
IDS Forum
RE: Physical restore failed
Posted By: Tang, Wally, CTR, DMA-Riv/IT
Date: Tuesday, 27 April 2010, at 3:47 p.m.
Good news; for some reason, I tried to restore once again. It is restored
without any problem. I am going rerun the restore process again, is there
any suggestion before I do it again.
Thanks for all your help.
Wally Tang
DOD-Defense Media Center - IT
Lockheed Martin - IT
23755 Z Street
Riverside, CA 92518-2017
951-413-2246
E-mail: wally.tang.ctr@dma.mil
-----Original Message-----
From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
Everett Mills
Sent: Tuesday, April 27, 2010 9:06 AM
To: ids@iiug.org
Subject: RE: Physical restore failed [19890]
That's what I thought, but we're getting down to grasping at straws...
If he was on a supported version, I'd suggest a support call.
--EEM
> -----Original Message-----
> From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf Of
> Keith Simmons
> Sent: Tuesday, April 27, 2010 10:49 AM
> To: ids@iiug.org
> Subject: Re: Physical restore failed [19889]
>
> I don't think the issue is with missing chunks, the restore wouldn't
> even start if it
> couldn't find all the space in which to restore, nor are any chunks
> too small as,
> again, the restorewill not try to start if it cannot find/create
> chunks of the correct
> size.
> Is this restore on a freshly reboted server, or has it been running
> for a period of
> time? A clean reboot might help.
> I don't we've seen your sqlhosts file, appropriate entries in
> /etc/services
> and
> detail from onconfig.
>
> Keith
>
> On 27 April 2010 16:20, Everett Mills <Everett.Mills@nationalbeef.com>
> wrote:
> > OK, then. How about running onstat -d on your primary. That will tell
> us if
> > the restore is looking for a device it can't find.
> >
> > --EEM
> >
> >> -----Original Message-----
> >> From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf
> Of
> >> Tang, Wally, CTR, DMA-Riv/IT
> >> Sent: Tuesday, April 27, 2010 10:11 AM
> >> To: ids@iiug.org
> >> Subject: RE: Physical restore failed [19886]
> >>
> >> I looked at the syslog.log, there was no any error during the time
> of
> >> "aborted"
> >>
> >> Wally Tang
> >> DOD-Defense Media Center - IT
> >> Lockheed Martin - IT
> >> 23755 Z Street
> >> Riverside, CA 92518-2017
> >> 951-413-2246
> >> E-mail: wally.tang.ctr@dma.mil
> >>
> >> -----Original Message-----
> >> From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf
> Of
> >> rroussey@comcast.net
> >> Sent: Tuesday, April 27, 2010 7:27 AM
> >> To: ids@iiug.org
> >> Subject: Re: Physical restore failed [19882]
> >>
> >> Yeah, "aborted by client" is suspicious. Is there anything unusual
> in
> >> /var/adm/syslog/syslog.log file at the time it aborts? Any memory
> >> errors on
> >> the system?
> >>
> >> Bob
> >>
> >> ----- Original Message -----
> >> From: "Everett Mills" <Everett.Mills@nationalbeef.com>
> >> To: ids@iiug.org
> >> Sent: Tuesday, April 27, 2010 10:05:17 AM GMT -05:00 US/Canada
> Eastern
> >> Subject: RE: Physical restore failed [19878]
> >>
> >> One thing I notice is that it runs for over an hour before it
> crashes.
> >> Is
> >> the
> >> device you're restoring to smaller than the one the backup was made
> on?
> >> Was
> >> a
> >> chunk added to the original and no device created to match it on the
> >> new
> >> one?
> >> Not sure what "Aborted by client" means in this context. Ordinarily,
> >> I'd
> >> think
> >> someone had hit ctrl-C or issued kill -9 against the ontape -r.
> >>
> >> --EEM
> >>
> >> > -----Original Message-----
> >> > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On Behalf
> Of
> >> > Roger Kee
> >> > Sent: Tuesday, April 27, 2010 8:49 AM
> >> > To: ids@iiug.org
> >> > Subject: Re: Physical restore failed [19877]
> >> >
> >> > Wally,
> >> >
> >> > Do you have multiple installs of IDS on your server or are you
> trying
> >> > to
> >> > restore to a different server
> >> > than where this archive was taken? I see in the message log that
> it
> >> is
> >> > using IDS 7.31.UD5, but
> >> > the ontape header info says IDS 7.31.UD6. This may be your
> problem.
> >> >
> >> > On Tue, Apr 27, 2010 at 9:40 AM, Tang, Wally, CTR, DMA-Riv/IT <
> >> > Wally.Tang.CTR@dma.mil> wrote:
> >> >
> >> > > Thanks, Art. Below is the message from the log:
> >> > >
> >> > > Thu Apr 22 12:45:04 2010
> >> > >
> >> > > 12:45:04 Event alarms enabled. ALARMPROG =
> >> > '/usr/informix/etc/log_full.sh'
> >> > > 12:45:10 DR: DRAUTO is 0 (Off)
> >> > > 12:45:10 Requested shared memory segment size rounded from 588KB
> to
> >> > 592KB
> >> > > 12:45:10 Informix Dynamic Server Version 7.31.UD5 Software
> Serial
> >> > > Number AA
> >> > > D#J358202
> >> > > 12:45:11 Informix Dynamic Server Initialized -- Shared Memory
> >> > Initialized.
> >> > > 12:45:11 Dynamically allocated new virtual shared memory segment
> >> > (size
> >> > > 8192KB)
> >> > > 12:45:11 Dataskip is now OFF for all dbspaces
> >> > > 12:45:11 Restartable Restore has been DISABLED
> >> > > 12:45:11 Recovery Mode
> >> > > 12:45:15 Physical Restore of rootdbs, tasablob, tasa, tasalog
> >> > started.
> >> > >
> >> > > 12:45:20 Checkpoint Completed: duration was 0 seconds.
> >> > > 12:45:20 Checkpoint loguniq 647, logpos 0xa018
> >> > >
> >> > > 13:03:39 Checkpoint Completed: duration was 0 seconds.
> >> > > 13:03:39 Checkpoint loguniq 647, logpos 0xa018
> >> > >
> >> > > 14:26:18 Aborting physical restore of ROOT DBSpace
> >> > > 14:26:18 Aborted by client.
> >> > > 14:26:18 Informix Dynamic Server Stopped.
> >> > >
> >> > > Wally Tang
> >> > > DOD-Defense Media Center - IT
> >> > > Lockheed Martin - IT
> >> > > 23755 Z Street
> >> > > Riverside, CA 92518-2017
> >> > > 951-413-2246
> >> > > E-mail: wally.tang.ctr@dma.mil
> >> > >
> >> > > -----Original Message-----
> >> > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On
> Behalf
> >> Of
> >> > Art
> >> > > Kagel
> >> > > Sent: Monday, April 26, 2010 8:12 PM
> >> > > To: ids@iiug.org
> >> > > Subject: Re: Physical restore failed [19858]
> >> > >
> >> > > Wait, I didn't notice this before. The ontape output says:
> >> > >
> >> > > > Physical restore failed - could not fork server connection
> >> > >
> >> > > That means the real problem is that it could not start up the
> >> engine
> >> > > instance after restoring the reserved pages so that the engine
> >> could
> >> > > complete the restore. This is usually a problem with some
> parameter
> >> > in the
> >> > > ONCONFIG file or with the configuration of the server's sqlhosts
> >> file
> >> > > entries. What does the server message log say at the time the
> >> engine
> >> > tried
> >> > > to start up last during the restore? The time of the restore
> below
> >> > was:
> >> > > April 22 at 13:03
> >> > >
> >> > > Art
> >> > >
> >> > > Art S. Kagel
> >> > > Advanced DataTools (www.advancedatatools.com)
> >> > > IIUG Board of Directors (art@iiug.org)
> >> > >
> >> > > See you at the 2010 IIUG Informix Conference
> >> > > April 25-28, 2010
> >> > > Overland Park (Kansas City), KS
> >> > > www.iiug.org/conf
> >> > >
> >> > > Disclaimer: Please keep in mind that my own opinions are my own
> >> > opinions
> >> > > and
> >> > >
> >> > > do not reflect on my employer, Advanced DataTools, the IIUG, nor
> >> any
> >> > other
> >> > > organization with which I am associated either explicitly,
> >> > implicitly, or
> >> > > by
> >> > >
> >> > > inference. Neither do those opinions reflect those of other
> >> > individuals
> >> > > affiliated with any entity with which I am affiliated nor those
> of
> >> > the
> >> > > entities themselves.
> >> > >
> >> > > On Mon, Apr 26, 2010 at 9:29 AM, Tang, Wally, CTR, DMA-Riv/IT <
> >> > > Wally.Tang.CTR@dma.mil> wrote:
> >> > >
> >> > > > Good morning, Art,
> >> > > >
> >> > > > It is a file.
> >> > > >
> >> > > > Wally Tang
> >> > > > DOD-Defense Media Center - IT
> >> > > > Lockheed Martin - IT
> >> > > > 23755 Z Street
> >> > > > Riverside, CA 92518-2017
> >> > > > 951-413-2246
> >> > > > E-mail: wally.tang.ctr@dma.mil
> >> > > >
> >> > > > -----Original Message-----
> >> > > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On
> >> Behalf
> >> > Of
> >> > > Art
> >> > > > Kagel
> >> > > > Sent: Friday, April 23, 2010 4:45 PM
> >> > > > To: ids@iiug.org
> >> > > > Subject: Re: Physical restore failed [19842]
> >> > > >
> >> > > > What is the backup device "/backups/informix_bu"? File? Tape?
> >> Named
> >> > > > pipe? What?
> >> > > >
> >> > > > Art
> >> > > >
> >> > > > Art S. Kagel
> >> > > > Advanced DataTools (www.advancedatatools.com)
> >> > > > IIUG Board of Directors (art@iiug.org)
> >> > > >
> >> > > > See you at the 2010 IIUG Informix Conference
> >> > > > April 25-28, 2010
> >> > > > Overland Park (Kansas City), KS
> >> > > > www.iiug.org/conf
> >> > > >
> >> > > > Disclaimer: Please keep in mind that my own opinions are my
> own
> >> > opinions
> >> > > > and
> >> > > >
> >> > > > do not reflect on my employer, Advanced DataTools, the IIUG,
> nor
> >> > any
> >> > > other
> >> > >
> >> > > > organization with which I am associated either explicitly,
> >> > implicitly, or
> >> > > > by
> >> > > >
> >> > > > inference. Neither do those opinions reflect those of other
> >> > individuals
> >> > > > affiliated with any entity with which I am affiliated nor
> those
> >> of
> >> > the
> >> > > > entities themselves.
> >> > > >
> >> > > > On Fri, Apr 23, 2010 at 9:25 AM, Tang, Wally, CTR, DMA-Riv/IT
> <
> >> > > > Wally.Tang.CTR@dma.mil> wrote:
> >> > > >
> >> > > > > Good morning, Art,
> >> > > > >
> >> > > > > Output of ontape -r
> >> > > > >
> >> > > > > # ontape -r
> >> > > > >
> >> > > > > Please mount tape 1 on /backups/informix_bu and press Return
> to
> >> > > continue
> >> > >
> >> > > > > ...
> >> > > > >
> >> > > > > Archive Tape Information
> >> > > > >
> >> > > > > Tape type: Archive Backup Tape
> >> > > > > Online version: Informix Dynamic Server Version 7.31.UD6
> >> > > > > Archive date: Wed Apr 21 03:00:03 2010
> >> > > > > User id: root
> >> > > > > Terminal id: ?
> >> > > > > Archive level: 0
> >> > > > > Tape device: /backups/informix_bu
> >> > > > > Tape blocksize (in k): 16
> >> > > > > Tape size (in k): 12000000
> >> > > > > Tape number in series: 1
> >> > > > >
> >> > > > > Spaces to restore:1 [rootdbs ]
> >> > > > > 2 [tasablob ]
> >> > > > > 3 [tasa ]
> >> > > > > 4 [tasalog ]
> >> > > > >
> >> > > > > Archive Information
> >> > > > >
> >> > > > > Informix Dynamic Server Copyright(C) 1986-1998 Informix
> >> Software,
> >> > Inc.
> >> > > > > Initialization Time 04/10/2003 10:10:35
> >> > > > > System Page Size 2048
> >> > > > > Version 6
> >> > > > > Archive CheckPoint Time 04/21/2010 03:00:42
> >> > > > >
> >> > > > > Dbspaces
> >> > > > > number flags fchunk nchunks flags owner name
> >> > > > > 1 1 1 1 N informix rootdbs
> >> > > > > 2 1 2 2 N informix tasa
> >> > > > > 3 2001 3 1 N T informix tasatemp
> >> > > > > 4 1 4 1 N informix tasalog
> >> > > > > 5 11 5 1 N B informix tasablob
> >> > > > >
> >> > > > > Chunks
> >> > > > > chk/dbs offset size free bpages flags pathname
> >> > > > > 1 1 0 26000 2913 PO- /dev/ifx/rootdbs
> >> > > > > 2 2 0 1000000 57 PO- /dev/ifx/tasa
> >> > > > > 3 3 0 1000000 999897 PO- /dev/ifx/tasatemp
> >> > > > > 4 4 0 1000000 999947 PO- /dev/ifx/tasalog
> >> > > > > 5 5 0 1000000 1000000 POB /dev/ifx/tasablob
> >> > > > > 6 2 0 1000000 845180 PO- /dev/ifx/tasa1
> >> > > > >
> >> > > > > Continue restore? (y/n)y
> >> > > > > Do you want to back up the logs? (y/n)n
> >> > > > >
> >> > > > > Physical restore failed - could not fork server connection
> >> > > > >
> >> > > > > Physical restore failed - function read archive backup
> failed
> >> > code -2
> >> > > > errno
> >> > > > > 0
> >> > > > >
> >> > > > > Program over.
> >> > > > >
> >> > > > > # ls -l
> >> > > > > total 0
> >> > > > > crw-rw---- 1 informix informix 64 0x010000 Mar 20 2003 group
> >> > > > > brw-rw---- 1 informix informix 64 0x010005 Apr 22 13:03
> rootdbs
> >> > > > > crw-rw---- 1 informix informix 64 0x010005 Mar 20 2003
> rrootdbs
> >> > > > > crw-rw---- 1 informix informix 64 0x010001 Mar 20 2003 rtasa
> >> > > > > crw-r----- 1 informix informix 64 0x010006 Mar 27 2003
> rtasa1
> >> > > > > crw-rw---- 1 informix informix 64 0x010004 Mar 20 2003
> >> rtasablob
> >> > > > > crw-rw---- 1 informix informix 64 0x010003 Mar 20 2003
> rtasalog
> >> > > > > crw-rw---- 1 informix informix 64 0x010002 Mar 20 2003
> >> rtasatemp
> >> > > > > brw-rw---- 1 informix informix 64 0x010001 Apr 22 14:18 tasa
> >> > > > > brw-rw---- 1 informix informix 64 0x010006 Apr 22 14:26
> tasa1
> >> > > > > brw-rw---- 1 informix informix 64 0x010004 Apr 22 13:03
> >> tasablob
> >> > > > > brw-rw---- 1 informix informix 64 0x010003 Apr 20 13:00
> tasalog
> >> > > > > brw-rw---- 1 informix informix 64 0x010002 Apr 20 13:02
> >> tasatemp
> >> > > > >
> >> > > > > # ls -lL
> >> > > > > total 0
> >> > > > > crw-rw---- 1 informix informix 64 0x010000 Mar 20 2003 group
> >> > > > > brw-rw---- 1 informix informix 64 0x010005 Apr 22 13:03
> rootdbs
> >> > > > > crw-rw---- 1 informix informix 64 0x010005 Mar 20 2003
> rrootdbs
> >> > > > > crw-rw---- 1 informix informix 64 0x010001 Mar 20 2003 rtasa
> >> > > > > crw-r----- 1 informix informix 64 0x010006 Mar 27 2003
> rtasa1
> >> > > > > crw-rw---- 1 informix informix 64 0x010004 Mar 20 2003
> >> rtasablob
> >> > > > > crw-rw---- 1 informix informix 64 0x010003 Mar 20 2003
> rtasalog
> >> > > > > crw-rw---- 1 informix informix 64 0x010002 Mar 20 2003
> >> rtasatemp
> >> > > > > brw-rw---- 1 informix informix 64 0x010001 Apr 22 14:18 tasa
> >> > > > > brw-rw---- 1 informix informix 64 0x010006 Apr 22 14:26
> tasa1
> >> > > > > brw-rw---- 1 informix informix 64 0x010004 Apr 22 13:03
> >> tasablob
> >> > > > > brw-rw---- 1 informix informix 64 0x010003 Apr 20 13:00
> tasalog
> >> > > > > brw-rw---- 1 informix informix 64 0x010002 Apr 20 13:02
> >> tasatemp
> >> > > > >
> >> > > > > Please advice.
> >> > > > >
> >> > > > > Wally Tang
> >> > > > > DOD-Defense Media Center - IT
> >> > > > > Lockheed Martin - IT
> >> > > > > 23755 Z Street
> >> > > > > Riverside, CA 92518-2017
> >> > > > > 951-413-2246
> >> > > > > E-mail: wally.tang.ctr@dma.mil
> >> > > > >
> >> > > > > -----Original Message-----
> >> > > > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org] On
> >> > Behalf Of
> >> > > > Art
> >> > > > > Kagel
> >> > > > > Sent: Thursday, April 22, 2010 3:19 PM
> >> > > > > To: ids@iiug.org
> >> > > > > Subject: Re: Physical restore failed [19798]
> >> > > > >
> >> > > > > Post the entire output from the ontape -r and ls -l and ls -
> lL
> >> > listings
> >> > > > of
> >> > > >
> >> > > > > the chunk files.
> >> > > > >
> >> > > > > Art
> >> > > > >
> >> > > > > Art S. Kagel
> >> > > > > Advanced DataTools (www.advancedatatools.com)
> >> > > > > IIUG Board of Directors (art@iiug.org)
> >> > > > >
> >> > > > > See you at the 2010 IIUG Informix Conference
> >> > > > > April 25-28, 2010
> >> > > > > Overland Park (Kansas City), KS
> >> > > > > www.iiug.org/conf
> >> > > > >
> >> > > > > Disclaimer: Please keep in mind that my own opinions are my
> own
> >> > > opinions
> >> > >
> >> > > > > and
> >> > > > >
> >> > > > > do not reflect on my employer, Advanced DataTools, the IIUG,
> >> nor
> >> > any
> >> > > > other
> >> > > >
> >> > > > > organization with which I am associated either explicitly,
> >> > implicitly,
> >> > > or
> >> > > > > by
> >> > > > >
> >> > > > > inference. Neither do those opinions reflect those of other
> >> > individuals
> >> > > > > affiliated with any entity with which I am affiliated nor
> those
> >> > of the
> >> > > > > entities themselves.
> >> > > > >
> >> > > > > On Thu, Apr 22, 2010 at 5:28 PM, Tang, Wally, CTR, DMA-
> Riv/IT <
> >> > > > > Wally.Tang.CTR@dma.mil> wrote:
> >> > > > >
> >> > > > > > FYI, the older backup file got the same error:
> >> > > > > >
> >> > > > > > Continue restore? (y/n)y
> >> > > > > > Do you want to back up the logs? (y/n)n
> >> > > > > > Physical restore failed - function read archive backup
> failed
> >> > code -2
> >> > > > > errno
> >> > > > > > 0
> >> > > > > >
> >> > > > > > Program over.
> >> > > > > >
> >> > > > > > Wally Tang
> >> > > > > > DOD-Defense Media Center - IT
> >> > > > > > Lockheed Martin - IT
> >> > > > > > 23755 Z Street
> >> > > > > > Riverside, CA 92518-2017
> >> > > > > > 951-413-2246
> >> > > > > > E-mail: wally.tang.ctr@dma.mil
> >> > > > > >
> >> > > > > > -----Original Message-----
> >> > > > > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org]
> On
> >> > Behalf
> >> > > Of
> >> > > > > Art
> >> > > > > > Kagel
> >> > > > > > Sent: Thursday, April 22, 2010 2:20 PM
> >> > > > > > To: ids@iiug.org
> >> > > > > > Subject: Re: Physical restore failed [19794]
> >> > > > > >
> >> > > > > > Not clear what you are asking. Did the second restore also
> >> > fail? Did
> >> > > > you
> >> > > >
> >> > > > > > try the newer archive set again or just fallback to the
> older
> >> > one?
> >> > > Can
> >> > >
> >> > > > > you
> >> > > > >
> >> > > > > > roll forward your logical logs to get back to current?
> >> > > > > >
> >> > > > > > Art
> >> > > > > >
> >> > > > > > Art S. Kagel
> >> > > > > > Advanced DataTools (www.advancedatatools.com)
> >> > > > > > IIUG Board of Directors (art@iiug.org)
> >> > > > > >
> >> > > > > > See you at the 2010 IIUG Informix Conference
> >> > > > > > April 25-28, 2010
> >> > > > > > Overland Park (Kansas City), KS
> >> > > > > > www.iiug.org/conf
> >> > > > > >
> >> > > > > > Disclaimer: Please keep in mind that my own opinions are
> my
> >> own
> >> > > > opinions
> >> > > >
> >> > > > > > and
> >> > > > > >
> >> > > > > > do not reflect on my employer, Advanced DataTools, the
> IIUG,
> >> > nor any
> >> > > > > other
> >> > > > >
> >> > > > > > organization with which I am associated either explicitly,
> >> > > implicitly,
> >> > >
> >> > > > or
> >> > > > > > by
> >> > > > > >
> >> > > > > > inference. Neither do those opinions reflect those of
> other
> >> > > individuals
> >> > > > > > affiliated with any entity with which I am affiliated nor
> >> those
> >> > of
> >> > > the
> >> > >
> >> > > > > > entities themselves.
> >> > > > > >
> >> > > > > > On Thu, Apr 22, 2010 at 4:48 PM, Tang, Wally, CTR, DMA-
> Riv/IT
> >> <
> >> > > > > > Wally.Tang.CTR@dma.mil> wrote:
> >> > > > > >
> >> > > > > > > Thanks, Art. I verified all the chunks are owned by
> >> Informix
> >> > > Informix
> >> > > > > and
> >> > > > > > > have 660 permissions. I had copied the backups from the
> >> last
> >> > > > successful
> >> > > > > > > restore and executed the restore process; hopefully, the
> >> > backup
> >> > > file
> >> > >
> >> > > > is
> >> > > > > > > corrupted?
> >> > > > > > >
> >> > > > > > > Please advice.
> >> > > > > > >
> >> > > > > > > Wally Tang
> >> > > > > > > DOD-Defense Media Center - IT
> >> > > > > > > Lockheed Martin - IT
> >> > > > > > > 23755 Z Street
> >> > > > > > > Riverside, CA 92518-2017
> >> > > > > > > 951-413-2246
> >> > > > > > > E-mail: wally.tang.ctr@dma.mil
> >> > > > > > >
> >> > > > > > > -----Original Message-----
> >> > > > > > > From: ids-bounces@iiug.org [mailto:ids-bounces@iiug.org]
> On
> >> > Behalf
> >> > > > Of
> >> > > > > > Art
> >> > > > > > > Kagel
> >> > > > > > > Sent: Thursday, April 22, 2010 1:40 PM
> >> > > > > > > To: ids@iiug.org
> >> > > > > > > Subject: Re: Physical restore failed [19792]
> >> > > > > > >
> >> > > > > > > Errno 2 is privileges on files. Check that all of the
> >> chunks
> >> > (the
> >> > > > chunk
> >> > > > > > > list should have printed out when you started the
> restore)
> >> > are
> >> > > owned
> >> > >
> >> > > > by
> >> > > > > > > user
> >> > > > > > >
> >> > > > > > > informix group informix and have 660 permissions. If you
> >> fix
> >> > that,
> >> > > > try
> >> > > >
> >> > > > > > the
> >> > > > > >
> >> > > > > > > restore again.
> >> > > > > > >
> >> > > > > > > Art
> >> > > > > > >
> >> > > > > > > Art S. Kagel
> >> > > > > > > Advanced DataTools (www.advancedatatools.com)
> >> > > > > > > IIUG Board of Directors (art@iiug.org)
> >> > > > > > >
> >> > > > > > > See you at the 2010 IIUG Informix Conference
> >> > > > > > > April 25-28, 2010
> >> > > > > > > Overland Park (Kansas City), KS
> >> > > > > > > www.iiug.org/conf
> >> > > > > > >
> >> > > > > > > Disclaimer: Please keep in mind that my own opinions are
> my
> >> > own
> >> > > > > opinions
> >> > > > >
> >> > > > > > > and
> >> > > > > > >
> >> > > > > > > do not reflect on my employer, Advanced DataTools, the
> >> IIUG,
> >> > nor
> >> > > any
> >> > >
> >> > > > > > other
> >> > > > > >
> >> > > > > > > organization with which I am associated either
> explicitly,
> >> > > > implicitly,
> >> > > >
> >> > > > > or
> >> > > > > > > by
> >> > > > > > >
> >> > > > > > > inference. Neither do those opinions reflect those of
> other
> >> > > > individuals
> >> > > > > > > affiliated with any entity with which I am affiliated
> nor
> >> > those of
> >> > > > the
> >> > > >
> >> > > > > > > entities themselves.
> >> > > > > > >
> >> > > > > > > On Thu, Apr 22, 2010 at 4:32 PM, Tang, Wally, CTR, DMA-
> >> Riv/IT
> >> > <
> >> > > > > > > Wally.Tang.CTR@dma.mil> wrote:
> >> > > > > > >
> >> > > > > > > > Needed help, we have IDS 7.31 on HPUX 11.0.
> >> > > > > > > >
> >> > > > > > > > We are currently encounter error message while
> restoring
> >> > our
> >> > > > > production
> >> > > > > > > > database:
> >> > > > > > > >
> >> > > > > > > > Physical restore failed - function read archive backup
> >> > failed
> >> > > code
> >> > >
> >> > > > -2
> >> > > > > > > errno
> >> > > > > > > > 0
> >> > > > > > > >
> >> > > > > > > > And when I viewed the online.log, it said
> >> > > > > > > >
> >> > > > > > > > 12:01:00 Aborting physical restore of ROOT DBSpace
> >> > > > > > > >
> >> > > > > > > > 12:01:00 Aborted by client.
> >> > > > > > > >
> >> > > > > > > > 12:01:00 Informix Dynamic Server Stopped.
> >> > > > > > > >
> >> > > > > > > > The last successful restore was two days ago.
> >> > > > > > > >
> >> > > > > > > > Please advice.
> >> > > > > > > >
> >> > > > > > > > Wally Tang
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > >
> >> > > > >
> >> > > > > >
> >> > > > > > > ***
> >> > > > > > > > Forum Note: Use "Reply" to post a response in the
> >> > discussion
> >> > > forum.
> >> > > > > > > >
> >> > > > > > > >
> >> > > > > > >
> >> > > > > > > --001636e0a70fafd2740484d9519b
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > >
> >> > > > >
> >> > > > > >
> >> > > > > > > ***
> >> > > > > > > Forum Note: Use "Reply" to post a response in the
> >> discussion
> >> > forum.
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > >
> >> > > > >
> >> > > > > > ***
> >> > > > > > > Forum Note: Use "Reply" to post a response in the
> >> discussion
> >> > forum.
> >> > > > > > >
> >> > > > > > >
> >> > > > > >
> >> > > > > > --001636e1f7ac1c43020484d9e025
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > >
> >> > > > >
> >> > > > > > ***
> >> > > > > > Forum Note: Use "Reply" to post a response in the
> discussion
> >> > forum.
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > >
> >> > > > > ***
> >> > > > > > Forum Note: Use "Reply" to post a response in the
> discussion
> >> > forum.
> >> > > > > >
> >> > > > > >
> >> > > > >
> >> > > > > --001636e1fb61c154df0484dab3e3
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > >
> >> > > > > ***
> >> > > > > Forum Note: Use "Reply" to post a response in the discussion
> >> > forum.
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > > ***
> >> > > > > Forum Note: Use "Reply" to post a response in the discussion
> >> > forum.
> >> > > > >
> >> > > > >
> >> > > >
> >> > > > --000e0cd32eaa9b14c40484f00421
> >> > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > >
> >> > > > ***
> >> > > > Forum Note: Use "Reply" to post a response in the discussion
> >> forum.
> >> > > >
> >> > > >
> >> > > >
> >> > > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > > ***
> >> > > > Forum Note: Use "Reply" to post a response in the discussion
> >> forum.
> >> > > >
> >> > > >
> >> > >
> >> > > --000e0cd2e05c9869a904852f42d9
> >> > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > *****
> >> > > ***
> >> > > Forum Note: Use "Reply" to post a response in the discussion
> forum.
> >> > >
> >> > >
> >> > >
> >> > >
> >> >
> >>
> ***********************************************************************
> >> > ********
> >> > > Forum Note: Use "Reply" to post a response in the discussion
> forum.
> >> > >
> >> > >
> >> >
> >> > --000e0cd13bd4ed5c2004853826a2
> >> >
> >> >
> >> >
> >>
> ***********************************************************************
> >> > ********
> >> > Forum Note: Use "Reply" to post a response in the discussion
> forum.
> >>
> >>
> ***********************************************************************
> >> *****
> >> ***
> >> Forum Note: Use "Reply" to post a response in the discussion forum.
> >>
> >>
> ***********************************************************************
> >> *****
> >> ***
> >> Forum Note: Use "Reply" to post a response in the discussion forum.
> >>
> >>
> >>
> ***********************************************************************
> >> ********
> >> Forum Note: Use "Reply" to post a response in the discussion forum.
> >
> >
> >
> ***********************************************************************
> ********
> > Forum Note: Use "Reply" to post a response in the discussion forum.
> >
> >
>
>
> ***********************************************************************
> ********
> Forum Note: Use "Reply" to post a response in the discussion forum.
****************************************************************************
***
Forum Note: Use "Reply" to post a response in the discussion forum.
Messages In This Thread
--
- Re: Physical restore failed
Keith Simmons -- Wednesday, 28 April 2010, at 3:33 a.m.
- RE: Physical restore failed
Tang, Wally, CTR, DMA-Riv/IT -- Wednesday, 28 April 2010, at 9:16 a.m.
- RE: Physical restore failed
Tang, Wally, CTR, DMA-Riv/IT -- Tuesday, 4 May 2010, at 9:47 a.m.
- Re: Physical restore failed
Art Kagel -- Tuesday, 4 May 2010, at 11:01 a.m.
- RE: Physical restore failed
Tang, Wally, CTR, DMA-Riv/IT -- Tuesday, 4 May 2010, at 11:34 a.m.
- RE: Physical restore failed
Tang, Wally, CTR, DMA-Riv/IT -- Tuesday, 4 May 2010, at 2:32 p.m.
IDS Forum is maintained by Administrator with WebBBS 5.12.
|
|
